Page Frame Number is abbreviated as PFN. Your hard drive uses the PFN to locate the position of each of your files on the disc. One of the Blue Screen of Death faults is PFN LIST CORRUPT.
The error indicates that the file has been corrupted, as the name implies. Your system will be unable to retrieve information or data from the hard drive if you receive this error.
The PFN List Corrupt problem is fatal to your computer since it prevents you from accessing any of your data.
What Are the Root Causes? Corrupt PFN List Error in Windows 10
This error can happen for a variety of reasons. The following are some of the most typical reasons of the PFN LIST CORRUPT issue.
1. Outdated drivers: Because drivers serve as a link between hardware and application software, they should always be kept up to date.
The issues from the previous version will be fixed when you update your drivers, and future versions will also optimise the hardware.
2. Problems with your hard drive: If your hard drive isn’t performing properly, it could be destroyed or corrupted. Your data on the hard drive is in jeopardy in this case. Checking your hard drive is therefore highly advised.
3. Infected/Corrupted System Files: When system files get infected or corrupted, the system begins to behave erratically. This particular blunder is a result of that pattern of behaviour.
It must be handled with caution, or all of your data may be lost. It is advised that you check for and repair any broken systems.
How to Repair a Corrupt PFN List on Windows 10
Although each remedy is for a different cause, there are various ways to solve PFN List Corrupt error. You can attempt all of them to fix the problem. Here are a few ideas. Simply follow them step by step and you will be free of this issue.
Solution 1: Run the BSOD Troubleshooter
As the name implies, BSOD stands for “Blue Screen of Death.” It means ‘Fatal Error’ or ‘System Crash.’
Any BSoD fault will be displayed and removed if we simply utilise the built-in BSOD troubleshooter. Simply follow the steps below to launch the BSOD troubleshooter.
Step 1: Press and hold the Windows key while selecting Settings.
Step 2: Next, open Troubleshooter and look for Update and Security.
Step 3: Select BSoD and follow the on-screen instructions to finish troubleshooting.
Step 4: Finally, if the troubleshooter discovered any faults, click Fix Errors to correct them.
If this solution did not work for you, please let us know. All of the other options listed below should be tried as well.
Solution 2: Run an SFC scan
System File Checker is an acronym for System File Checker. We can scan and fix corrupted system files with this scan, as corrupted files can also cause this issue. To do an SFC scan, simply follow the steps outlined below.
Step 1: Press Windows + R, type cmd, and then press Enter.
Step 2: Now, in cmd, type the following command.
sfc /scannow sfc /scannow sfc /s
Step 3: Press the Enter key.
A system scan will now be performed, and if any corrupted files are discovered, they will be repaired. If you’re still having problems, you should look into different options.
Solution 3: Remove the Applications that are Causing the Issue
Any third-party application could also cause the PFN List Corrupt issue. Because these programmes may have bugs or be infected with a virus that is extremely damaging to your computer.
As a result, it is recommended that you delete these applications for the time being. Simply follow the steps outlined below.
Step 1: Open Control Panel by using the Windows key.
Step 2: Scroll to the bottom of the page and select Uninstall a programme.
Step 3: Choose and uninstall the programmes.
Finally, restart your computer, and if the difficulties persist, you should look into other possibilities.
Solution 4; Run DISM
Deployment Image Servicing and Management (DISM) is an acronym for Deployment Image Servicing and Management.
The DISM servicing commands can be used to install, uninstall, configure, and update Windows features, packages, drivers, and international settings in a.wim file or VHD.
You can get rid of this error by running DISM. To run DISM, simply follow the steps below. DISM can be used in two ways.
Method 1: The Traditional Approach
You don’t need any more resources for this procedure.
Step 1: In the search bar, press the Windows key and type cmd.
Step 2: Now, in cmd, run the following command and press Enter.
DISM/Online/Cleanup-Image/RestoreHealth
Allow the procedure to complete before restarting your computer.
Method 2: Using the Windows Setup Media
This method can only be used if you have Windows installation CDs.
Step 1: Put your Windows installation media in the drive.
Step 2: Open CMD (Command Prompt) and type the commands below, then press Enter.
DISM/online/cleanup-image/scanhealth
DISM/onine/cleanup-image/restorehealth
source:WIM:X:SourcesInstall.wim:1 /LimitAccess DISM /Online /Cleanup-Image /RestoreHealth
Step 3: Switch the X drive to the Windows drive (e.g. C ). Allow the process to complete now. Restart your computer at the end.
If this approach does not work for you, you should look into other options.
Solution 5: Check for Hard Drive Corruption
If your hard disc is having problems or is physically damaged, it could trigger the PFN List Corrupt error. You should look for faults on your hard disc. Simply follow the steps outlined below.
Step 1: Restart your computer while holding down the shift key to access the Advanced Startup menu.
Step 2: Select Troubleshoot and then Advanced Options from the drop-down menu.
Step 3: Next, choose Command Prompt and type the command below, then press Enter.
/rebuildbcd /rebuildbcd /rebuildbcd /rebuild
exe /repairmbr
exe /fixboot /fixboot /fixboot /fixboot
chkdisk/r
Finally, restart your computer, and if the PFN List Corrupt error still occurs, you should look into other options.
Solution 6: Remove Microsoft OneDrive from your Computer
OneDrive is one of the most important features of Windows 10. It’s a cloud-based service that allows you to save your data there. OneDrive, according to several users, was the source of the issue.
As a result, you should give it a shot as well. Simply follow the procedures below to disable one drive. There are two approaches.
Method 1: Use the Group Policy Editor
Step 1: Press the Windows key and type “Edit Group Policy” into the search box, then press Enter.
Step 2: Next, go to Local Computer Policy and select Computer Configuration from the drop-down menu. Then select Administrative Templates from the drop-down menu. After that, go to Windows Components and then OneDrive.
Step 3: Right-click to prohibit OneDrive from being used for file storage.
Step 4: After that, select Enabled, then Apply, then OK.
Method 2: Make use of the Registry Editor
Step 1: Press Windows key + R and type “regedit” into the search box, then press Enter.
Step 2: Next, go to HKEY LOCAL MACHINESoftwarePoliciesMicrosoftWindows and double-click it.
Step 3: Next, look for OneDrive. If the key does not exist, proceed to the next step to create one.
Step 4: On Windows, right-click and select New > Key, then name it OneDrive.
Step 5: Right-click OneDrive and choose NEW, then DWORD (32 BIT). DisableFileSyncNGSC is the name of the file.
Step 6: Finally, double-click it and set the value to one. Then, to preserve your changes, click OK.
If you can’t get to any of these, try starting in safe mode first. Follow the steps below to boot into safe mode.
Step 1: Shut down and restart your computer three times in a row.
Step 2: Next, go to Troubleshoot, then Advanced Settings, Startup Settings, and finally Restart.
Step 3: When the computer restarts, you’ll see a page prompting you to press F5 or 5 to enter safe mode with networking.
If the PFN LIST CORRUPT problem still persists, you should exhaust all available options.
Solution 7: Make Sure Your Hardware is Up to Date
A fault or problem with the hardware might sometimes be the source of this error. Most of the time, the hardware that causes this issue is RAM. Follow the instructions below to see if your RAM is working properly.
Step 1: Get the MemTest86+ programme.
Step 2: Make sure you’re running it as an administrator. Allow it to run for a few hours.
Even though RAM is the primary reason, all components should be checked (e.g. Motherboard, Network Card, and Graphic Card).
Conclusion
I hope you find your solution to the PFN List Corrupt problem at the conclusion of this post. This is a really annoying problem, and you should deal with it as soon as possible because your data is at risk.
