Dynamic Host Configuration Protocol (DHCP) is used by the Internet to assign IP addresses to devices that request to join a network in a timely, automated, and centrally managed fashion. The DNS server, subnet mask, and default gateway can all be set up via a DHCP server.
Method 1: Obtaining IP Addresses From The DHCP Server Mechanically
If users have already decided on an IP address they want to use, they may have disabled the DHCP function, which causes this error. This could cause problems with your network configuration if the manual request is ignored. We’ll go into your internet preferences and change both of those settings to automatic to see if that helps.
Step 1: To open the Control Panel, hit the Windows key plus R, then type “control” and hit Enter.
Step 2: Once in the control panel, click on Network and Internet > Network and Sharing Center. Now, on the left side of the screen, choose the option labelled Change adapter settings.
Step 3: Now right-click on the adapter which is the medium of your connection and select Properties.
Step 4: To view the settings for Internet Protocol Version 4 (TCP/IPv4), double-click on the option.
Step 5: Choose one of these Get your hands on a new IP address and a list of DNS servers without lifting a finger.
Step 6: To save your changes and leave, click OK. Once you’ve restarted your computer and reconnected to your network, see if the problem persists.
Method 2: Turning on The DHCP Client
In addition to assisting with IP address registration, the DHCP client can also update your computer’s DNS records (as indicated above). If your computer’s DHCP client is malfunctioning, DHCP will not function properly over the network.
We’ll check in to make sure everything’s working smoothly with the customer service.
Step 1: To open the Services applet, hit Windows + R, then type “services.msc” and hit Enter.
Step 2: Discover the DHCP client entry once you get to the services section. Verify that it is active and set to Automatic startup.
Step 3: After making your edits, click the Apply button to save and quit. Try reestablishing a connection to your network and seeing if the issues persist.
Method 3: Reformatting the Network’s Settings
If neither of those options is successful, you can try resetting your computer’s network settings manually. We will clear your IP and then appropriately request a new one from the DHCP server after resetting all the parameters. Before attempting this fix, make sure you are logged in as an administrator.
Step 1: To launch the command prompt in elevated mode, hit the Windows key plus R, then type “command prompt” into the search box.
Step 2: Once you’re at an elevated command prompt, type in each of these commands:
ipconfig /flushdns
ipconfig /renew
Step 3: After resetting your network, try restarting your computer to see if that helps.
Method 4: Hardware Router Reset
If your home network’s DHCP server is also your router, it’s possible for both devices to be malfunctioning. This occurs infrequently, and when it does, a power cycle typically resolves the issue. The only way to be sure is to reboot your computer and router.
Step 1: Putting your PC and router to sleep. Deprive them of their primary source of electricity and wait around ten minutes.
Step 2: Unplug the power cord and then reconnect it once the allotted time has passed, then power on both devices. Hold off on making a network connection for around four minutes. See if the problem has been resolved.
If you’re still having trouble after trying these solutions, keep reading.
Verify that Windows is running the most recent version available.
Since the DHCP server is not a router and there may be additional ramifications, it is important to consult your IT administrator if you work in a large organisation.
After removing network drivers from the device manager, make sure you update them.
If you’re experiencing this issue after installing an update, try reverting Windows to an earlier restore point after first backing up your data.
