10 Ways to Fix Windows Error Code 0x80070570

Is the error code 0x80070570 bothering you with the updating process? Don’t worry! Here is an article to solve the error code 0x80070570 specifically.

The error code 0x80070570 usually occurs when you try to update your current Windows system or try to install the newer version. It is a commonly occurring error faced by many users while trying to update to Windows 7.

Windows Error Code 0x80070570 The File is Corrupted or Missing Error

Let’s begin our understanding of the 0x80070570 error.

When Does 0x80070570 Error Code Occur?

The ‘error code 0x80070570’ generally occurs in the middle of the installation process. It prevents the installation process from being completed.

Noticeably, the Error Code 0x80070570 usually pops up in three ways, which are as follows:

  • The first situation is where the following message is displayed during the Windows 7 installation: “Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available and restart the installation. “Error code: 0x80070570.”
  • Another problem was when users tried installing the new update for Windows 10 but couldn’t finish the update. The following error was displayed on the screen: “Some refresh records are missing or have issues.”
  • The error might also read like: “Error 0x80070570”: The file or directory is corrupt and unreadable”. It might be occurring due to certain hardware or software faults while transferring files from one type of storage to another.

Now, let’s see the various causes triggering the “Error code: 0x80070570”.

Why Does the 0x80070570 Error Occur?

Some of the most prominent causes triggering the ‘Error code: 0x80070570’are as follows:

  • The computer system is unable to process the required files or the settings that are needed for the installation CDs (or compact discs).
  • Corrupt or damaged installation disk
  • Inability of the application in locating the files required for the installation process. It might be because of the errors in registry settings or the essential registry files might be corrupted or missing.
  • The user trying to remove the files located in specific folders which are not allowed by the system.
  • Incorrectly reorganized Serial Advanced Technology Attachment (SATA) Drivers built:in during the installation process
  • Virus or malware preventing any action done by the computer system. A virus most commonly gets into the system while downloading something over the Internet, browsing a webpage, checking emails, etc. Now, once the virus or something alike is into the system, it can steal information, delete files and even manipulate data.

How to Fix Windows Error Code 0x80070570? 

Here are a few quick methods worth trying to fix the various types of ‘Error code: 0x80070570’.

Additional Guides:

Type 1: Windows 7 Installation Error Code 0x80070570

The first kind of ‘Error code: 0x80070570’ read “Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available and restart the installation. Error code: 0x80070570.” The message in itself explains a lot about the error.

Try the four easy techniques to fix the same error:

Method 1: Prevention is better than cure

A case of corrupted ISO file on a perfect CD or USB Drive and the case with a faulty CD or damaged USB Drive both can lead to the 0x80070570 error code. Avoiding such drives is strictly advised.

However, if you want to install the Windows using a USB drive try to use a new drive with the latest ISO file from a genuine and reliable source. If you prefer to use a CD, then use one burned with a copy of Windows and Microsoft products with a legal license key. Making sure that the CD or USB is from a trusted and genuine source is essential to prevent ‘Error code: 0x80070570’.

In case you are burning the CD yourself, it is suggested to burn the CD at a slow speed. It is because of the fact that the writing speed is directly proportional to the chances of occurrence of such errors. Also, make sure that the Compact disc which you are using is of remarkable quality. The CD must be a recent one as old CDs are more likely to damage. Using such old damaged CDs will lead to the occurrence of these errors again.

Thus, follow the suggestions and try preventing the errors beforehand.

Method 2: Retry Windows Installation

In case the ‘Error code: 0x80070570‘ pops up even after you use a new and well functioning USB Drive or CD, you can try re:installing Windows.

Again, make sure to use the latest ISO file. Also, before starting with the Re-Installation of the Windows again keep these extra tips in mind:

  1. Update the BIOS to the newest version.
  2. Disconnect all hardware connected to the computer, such as printer, external CD drive, microphone, speakers, etc.

Finally, begin your installation process by clicking on ‘Install Now’ button on the Installation Wizard.

If the error pops up again in between, cancel the installation process by clicking on ‘Cancel’ button. Then, click on ‘Install Now’ button again and most probably the Windows will start installing again.

If the problem is still prevalent, try the next method.

Method 3: Running Chkdsk in Windows RE

This method needs you to restart the computer and boot it with the installation disk. Follow the Steps given below to run chkdsk in windows RE:

Step 1: First of all, put the installation CD in the computer’s optical drive. Then, restart the computer system.

Step 2: Make sure to set the language properly. Then, select the Repair My Computer option.

Step 3: In case, any repair is needed select the respective installation and click on the Next button.

Step 4: Then, the menu would show the System Recovery option.
Click on the System Recovery option twice.

Step 5: A command prompt will pop open. Type ‘chkdsk/f/r‘ in the command prompt and press enter.

Step 6: Once all the checks and repairs are completed select ‘Yes’ to restart the computer and you are done.

Method 4: Changing the BIOS Settings

Improper settings of the BIOS are another prominent reason triggering the error.

Follow the Steps given below to change the BIOS settings:

Step 1: First of all, boot your computer system into BIOS.

Step 2: Now, press the respective key asked in the prompt information.

Step 3: After that navigate to the ‘Drives’ option.

Step 4: Then, select ‘SATA’ option.

Step 5: Then, change ‘RAID Auto detect:AHCI’ to ‘RAID Auto detect:ATA’.

Step 6: Finally, save the changes and exit the BIOS.

Try installation of Windows again. If the error still pops up, try the next method.

Method 5: Cleaning the Registry

Registries contain all the settings, options and entries for all software and hardware. Registries ensure that the system runs correctly without any problem. Thus, the registry won’t work in case of any damaged or corrupted software and hardware files.

Therefore, cleaning the system registry is the most prominent solution if the registry is trigger for the 0x80070570 error.

Now, you can either clean the registry manually or automatically (using certain tools). However, it is recommended to use specific tools and carry out the process automatically. It is because the manual process is comparatively complicated. It requires the use of many professional operations and is thus time consuming.

Make sure to backup all the important files on your system.

Now, let’s move to the second type of ‘error code: 0x80070570’.

Type 2 – Windows Update KB3116908 Failed to Install Error 0x80070570

This type of ‘error code: 0x80070570’ was triggered by the recent cumulative update for Windows 10.The following error was displayed on the screen: “Some refresh records are missing or have issues.”

As stated in the error message itself the error is caused by certain missing or damaged refresh records.

Follow the Steps given below to fix the ‘Error Code: 0x80070570’ of this kind:

Step 1: Firstly, navigate to the ‘C’ Drive in ‘My Computer’.

Step 2: Then, navigate to the following location
“C:\Windows\SoftwareDistribution\Download”

Step 3: A list of various folders present in there will pop up. Find the folder named “a39ba752a8aa7203217c75802d7fddd”.

Step 4: Now, login as administrator and delete that folder.

Step 5: Finally, restart your computer system.

Try installing the updated Windows again.

Now, let’s check out the method to fix the error code 0x80070570 (type 3) triggered during transfer or deletion of files.

Type 3 – Error 0x80070570: The File or Directory is Corrupted and Unreadable

The error code in the third case reads like: “Error 0x80070570: The file or directory is corrupt and unreadable”. It might be occurring due to certain hardware or software faults while transferring files from one type of storage to another.

Follow the methods mentioned below to fix the “Error 0x80070570: The file or directory is corrupt and unreadable” error.

Method 1: Scan for Virus

There is a possibility that the error may be occurring due to change in system settings by some virus or malware present in your system. In this case, you need to scan the system for any virus and remove it accordingly. You can scan for viruses and malwares using genuine antivirus and anti:malwares.

Also, make sure your Windows firewall is enabled to prevent such attacks in future.

Try updating again. If the error is still prevalent try the next method.

Method 2: Checking for the Drivers Installed and Updating Drivers

Obsolete or corrupted drivers can be the trigger for the “Error 0x80070570: The file or directory is corrupt and unreadable” issue. Drivers are quite important for system operations and thus they should be kept up to date for correct information transfer.

Follow the Steps given below to update drivers:

Step 1: First of all, press the ‘Windows’ key and ‘X’ together. Now, choose device manager from the list of options visible at the bottom left corner.

Step 2: Now, find the outdated driver and right click on it.

Step 3: Then, select ‘update the driver software’ option from the drop down menu.

Step 4: If needed, an updated driver will be installed.

Try the Windows update again. If the error still pops up try the next method.

Method 3: Defragmenting the Hard Disk

The reason behind the “Error 0x80070570: The file or directory is corrupt and unreadable” issue can be the fragmented hard disk.

Usually, the data on the hard drive does not organize well in disorder. Defragmenting the hard drive implies easy access to all the parts of the drive. Thus, defragmenting the hard drive is a useful solution in this case.

Follow the Steps given below to defragment the hard drive:

Step 1: Firstly, navigate to the “Control Panel” from the Start menu.

Step 2: Then, navigate to the “System and Security” option and click on “Defragment your Hard Drive” option.

Step 3: A Defragmenter window will pop open. Find the “Analyze Disk” button there and click on it.

Step 4: It will start checking the need for defragmenting. In case the need appears, click on ‘Defragment Disk’ button.

Once the defragmentation is completed try updating again. If the ‘error code: 0x80070570’ still pops up try the next method.

Conclusion

Hopefully, one of the methods mentioned above were able to fix the Error code 0x80070570 for you. Make sure to check the type of error by reading the error message thoroughly. Then, follow the respective method and solve the Error code 0x80070570 as soon as possible. At last, you will be able to update your Windows to the newer version and enjoy the various new features along with faster user experience.