Windows Update Error ‘0x80070020’

As we progress towards a contemporary world, technology has become an integral component of our daily lives.

Computers and laptops assist us in formulating a variety of procedures on a regular basis. However, these devices can have mistakes and flaws that obstruct our work.

Also, as we all know, Windows Update is a service that provides support for devices that run the Microsoft Windows operating system.

Windows Update’s main goal is to keep Microsoft Windows, Microsoft programmes, and most equipment drivers current.

Windows Working automatically updates itself. In any event, the updating operation might be risky at times, and numerous problems can occur. Windows Update Error 0x80070020 is one such error.

Many consumers have experienced Windows Update Error 0x80070020 while updating their operating system.

It only occurs when a programme attempts to obstruct the updating process. In this article, we’ll go through it in further detail.

Windows Update Errors and Their Causes 0x80070020

The Windows update service, in general, provides the most recent security updates, although the procedure does not always run properly.

The Windows Update error 0x80070020 would appear. So, let’s talk about the reasons behind this error.

Windows Update Error 0x80070020 is Caused by a Number of Factors –

This issue might be caused by corrupted or missing system files.

The Background Intelligent Transfer Service can become corrupted at times.

Blunder 0x80070020 can be caused by antivirus products that perform real-time scanning.

How to Fix Error 0x80070020 in Windows Update

The methods listed below are solutions that can assist you in dealing with the problem and are safe to utilise.

These approaches do not require any technical knowledge; all that is required is a basic understanding of the device, after which you may follow the instructions and resolve the issue.

Method 1: Use the Windows Update Troubleshooter

The Windows update troubleshooter is the first option on the list. It assists you in detecting the mistakes that are causing them. The steps below will assist you in running it –

Step 1: To access Windows settings, press the Windows logo and the ‘I’ key at the same time.

Step 2: Go to Updates and Security.

Step 3: Select Run the Troubleshooter from the Windows Update menu.

Step 4: Now you must wait for some time in order to find and correct the problem.

Step 5: Restart your computer after you’re finished.

Method 2: Temporarily Disable your AntiVirus Software

The second option on the list is to temporarily disable your antivirus programme. Error 0x80070020 can also be caused by antivirus software.

As a result, to ensure that antivirus software is not the source of the problem. You can either uninstall your antivirus software and update Windows, or you can install a new and more powerful antivirus application.

Method 3: Restart the Intelligent Transfer Service in the Background

Background Windows’ Intelligent Transfer Service is a critical component. Its goal is to keep the device up to date.

However, it can become corrupted for a variety of reasons, resulting in error 0x80070020. The first step in repairing BITS is to restart it. The steps below will assist you in doing so:

Step 1: The first step is to open the Run box by pressing the Windows logo and the ‘r’ key at the same time.

Step 2: Now type input msc and then hit Enter. A new window will open.

Step 3: Then, in the Services list, go to Background Intelligent Transfer Service.

Step 4: Right-click it and select Properties from the drop-down menu. After that, go to Startup and change it to.

Step 5: If the service isn’t up and running, click the start button. If it’s already operating, shut it off and restart it.

Step 6: Now, to save the changes, click Ok and Apply.

Method 4: Restart the Windows Update Services

Restarting the Windows Update Services is the fourth option on the list. When there is an issue with the Windows Update Services, a Windows error may appear.

The instructions below will assist you in resuming Windows Update Services –

Step 1: To open the Run box, press the Windows logo and the ‘r’ key at the same time.

Step 2: Click on Ok after typing cmd. To open the command prompt, use the Ctrl+ Shift+ Enter keys simultaneously.

Step 3: Once it’s up and running, type the commands listed below and press enter.

wuauserv, cryptSvc, bits, and msiserver should all be stopped.

renC:WindowsSoftwareDistribution SoftwareDistribution.old\sren Net start wuauserv net start cryptSvc net start bits net start msiserver C:WindowsSystem32catroot2 Catroot2.old

Step 4: Check to see whether the problem has been resolved. If that’s not the case, let’s move on to the next option.

Method 5: Perform a DISM and SFC Scan

Running a DISM and SFC scan is the fifth method on the list. The programmes DISM Scan and SFC Scan are used to scan for and repair faults in corrupted files in Windows.

The steps below will walk you through running the DISM and SFC scans.

Step 1: To open the Run box, press the Windows logo and the ‘R’ key at the same time.

Step 2: Click on Ok after typing cmd. To open the command prompt, use the Ctrl+ Shift+ Enter keys simultaneously.

Step 3: Now type DISM /Online /Cleanup-Image /RestoreHealth into the command prompt and hit Enter.

Step 4: After the DISM scan for corrupted files in the system is complete, run the SCF command to restore the files:

Step 5: Type sfc /scannow into the command prompt and press Enter. Please be patient as this process may take some time.

Step 6: After the scan is completed, try to update your Windows and see if the error has been resolved. If that’s not the case, let’s move on to the next option.

Method 6: Check and Repair Errors on Your Hard Drive

Checking and correcting errors on your disc is the sixth method on the list. Disk problems are also a possible cause of this issue.

A disc error indicates that something is wrong with the disc on your device. There is also a built-in Windows programme that can be used to locate and investigate various issues.

The first thing you need to do is open Command Prompt.
Now type chkdsk c: /f into the command prompt and press Enter.

The CHKDSK programme is a Windows software that may be used to repair mistakes on your hard drive. It is the most recommended tool, however it does not always work in certain situations.

So, let’s have a look at a quick solution to fix similar issues in Windows 10. MiniTool Partition Wizard Free Edition is another piece of software that can help you solve it.

The steps below will show you how to use it –

Step 1: Start the programme. Select the hard drive you want to examine and then click the check file system button.

Step 2: Select Check and correct discovered faults from the pop-up box that appears. Then press the Start button.

Step 3: After that, you’ll be asked a question; simply answer Yes.

Step 4: Check if the error still exists after restarting your device. If that’s the case, let’s move on to the next option.

Method 7: Delete the SoftwareDistribution Folder’s Contents

The next procedure is to delete the entire contents of the softwaredistribution folder. This folder is used to store files related to Windows Updates.

The problem may be resolved by deleting the contents. You can erase it by following the instructions below –

Step 1: Open the Windows Explorer programme.

Step 2: To get to C:WindowsSoftwareDistribution, go to C:WindowsSoftwareDistribution.

Step 3: To erase all of the contents, press the Del key.

Step 4: Examine whether the Windows Update Error 0x80070020 has been resolved.

Method 8: Restart your Computer and Install the Windows Update

Perform a Clean Boot and Install the Windows Update is the next option on the list. As we all know, when we turn on our computer, a few applications begin operating in the background.

Antivirus programmes, system utility programmes, and other previously installed software are among these apps. Error 0x80070020 can be caused by these programmes and software.

This dispute will be easier to resolve if you have a clean boot. All you have to do now is –

Step 1: To open the Run box, first press the Windows logo and the ‘R’ key together.

Step 2: Now type msconfig into the search box and hit Enter.

Step 3: Select Hide All Microsoft Services from the Services tab.

Step 4: To save the changes, look for Disable all and click Apply.

Step 5: Click the Open Task Manager button on the Startup tab.

Step 6: Disable the first enabled programme in the Task Manager tab. All you have to do now is disable each programme one by one.

Step 7: After that, click OK on the System Configuration Startup tab and shut the task management tab.

Step 8: Restart your computer to see if the problem has been resolved.